JT-19 Dental Wet Model Trimmer Abrasive Disc for Gypsum Arch - Dry Model Trimmer Wheel - Essential Dental Lab Equipment for Precision Crown & Bridge Work

Features:1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve2. Connect the waste-disposal tube to the unit3. Connect the power cord, and switch on the power switch (O=off, l=on)4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet)Attention:If there is some abnormal noise when working onPossible reason：① Axon is loosing ② Disc is not plain enough.How to solve it：①Dissemble the disc⒃ with spanner，make the snapRing tightly；② change the disc.The machine does not work when power onPossible reason：① fuse get burnt；② motor get burnt；③ switch get wrong.How to solve it：① change the fuse（22） which inside the socket；② change the motor；③ change theSpecificationsVoltage: 110V/60Hz±10%Power: 500W Rotational Speed: 2800 rpmDimensions: 44×35×35cm Weight of the De-ntal trimmer: 20kgContent:1x JT-19 Wet Model Trimmer Abrasive Disc Wheel De-ntal Lab EquipmentWarranty: one yearStatement (FDA, ARTG) The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item

Voltage 110V/60Hz±10%.Model Trimmer is widely used in restorative dentistry.It is a necessary tool for trimming plaster models,This machine is made of rust-proof all-cast aluminum which enables the users to achieve perfect trimming quality.

Dental Wet Model Trimmer Power 500W Rotational Speed 2800 rpm

Dimensions 44×35×35cm(17.3x13.7x13.7 inch),Weight of the De-ntal trimmer 20kg(44lbs).

Package1x JT-19 Wet Model Trimmer Abrasive Disc Wheel De-ntal Lab Equipment.

If you have any questions about Our Lab Equipment Abrasive Gypsum Arch , you can contact customer service, we will give you a satisfactory answer within 24 hours!